Onwa LD-510 Manual De Instrucciones página 50

5.6 Half-Load Detection System
Your machine features a half-load detection
system.
If you put less than half the maximum
load of laundry into your machine it will
automatically set the half-load function,
regardless of the programme you selected.
This means that the selected programme
will take less time to complete and will use
less water and energy.
(*) Model Dependant
5.7 Additional Functions
Wash
Rinse
Spin
End
Before starting a programme, you can
select an additional function.
• Press the button on the Control Panel
below the symbol of the additional
function you wish to select.
• If the symbol of the additional function
flashes continuously, the function has
been activated.
• If the symbol of the additional function
blinks, the function has not been
selected.
Reason for non-activation:
• The additional function is not
compatible with the selected washing
programme.
• Your machine has progressed too far
into the selected programme for the
additional function to be possible.
• The additional function you have
chosen is not compatible with
another additional function you have
already selected.
•
1. Temperature Selection
Temp.
Use the washing water temperature
adjustment button to alter the automatically
programmed washing water temperature.
When you select a programme, the
maximum temperature for that programme
is automatically selected. To adjust the
temperature, press the water temperature
adjustment button until the desired
temperature is displayed on the digital
display.
You can gradually reduce the washing
water temperature between the maximum
temperature for the selected programme
and cold washing
the temperature adjustment button.
If you have skipped the washing water
temperature you wanted, keep pressing
the washing water temperature adjustment
button until the desired temperature is
displayed again.
NOTE: 90°C is not displayed in the
Wash Temperature Indicators section of the
display panel. When the temperature value
is decreased to 60°, 40°, 30°,
washing) temperature levels by pressing
the temperature adjustment button, the
decreased temperature value is displayed
on the display panel.
2. No Spin(*)
No Spin
If you don't want your laundry to be spun at
the end of the selected wash programme,
press the No Spin button when the
symbol is displayed.
EN - 15
Wash
Rinse
Spin
End
selections by pressing
(cold
Wash
Rinse
Spin
End