Publicidad
Idiomas disponibles
Idiomas disponibles
Corners, sharp edges or
bouncing have a tendency to
snag the rotating accessory
and cause loss of control or
kickback.
e) Do not attach a saw chain
woodcarving blade or toothed
saw blade. Such blades create
frequent kickback and loss of
control.
Safety warnings specific for
polishing operations
Do not allow any loose portion
of the polishing bonnet or its
attachment strings to spin freely.
Tuck away or trim any loose
attachment strings. Loose and
spinning attachment strings can
entangle your fingers or snag on
the workpiece.
Additional safety warnings
a) Operation the polishing please
always wear eye protection.
b)Use suitable detectors to
determine if utility lines are
hidden in the work area or
call the local utility company
for assistance. Contact with
electric lines can lead to fire
and electric shock. Damaging a
gas line can lead to explosion.
Penetrating a water line causes
property damage or may cause
an electric shock.
EN
8
c) Release the On/Off switch
and set it to the off position
when the power supply is
interrupted, e. g., in case of a
power failure or when the
mains plug is pulled. This
prevents uncontrolled restarting.
d) Secure the workpiece.
A workpiece clamped with
clamping devices or in a vice is
held more secure than by hand.
DESCRIPTION OF SYMBOLS
The rating plate on your power
tool may show symbols. These
represent important information
about the product or instructions
on its use. Double insulated for
additional protection.
Symbol
WARNING
To reduce the risk of injury, user must read
instruction manual
Always wear eye protection
Class II tool
Technical data
DSP05-180/ASP05-180/KSP05-180(
Conformity of US and
CANADA
The letter "SP"
Publicidad
