Publicidad
Idiomas disponibles
Idiomas disponibles
_kuehlcontainer.book Seite 44 Freitag, 28. Juli 2006 4:12 16
All manuals and user guides at all-guides.com
Operation
7.10
Defrosting the cooling container
Humidity can form frost in the interior of the cooling container or on the va-
poriser. This reduces the cooling capacity. Defrost the device in good time to
avoid this.
Caution – danger of damaging the device
Never use hard or sharp tools to remove ice or to loosen objects
stuck to the device.
This is how to defrost the cooling container:
➤ Take the contents out.
➤ If necessary, put them in another cooling appliance.
➤ Switch off the device.
➤ Leave the cover open.
➤ Wipe off the defrosted water.
7.11
Replacing the device fuse
Caution – danger of electrocution
Disconnect the connection cable before you replace the device
fuse.
➤ Pull off the connection cable.
➤ Pry out the fuse (fig. a 1, page 7), for example, with a screwdriver.
➤ Replace the defective fuse with a new fuse that has the same rating.
– Cargo 500, Cargo 500P, FP150, FP150P, T22, T32, T56, T82, T162N:
15 A (T2,5AL 250V)
– Cargo 500P-18, T162F: 2 x 15 A (T2,5AL 250V)
➤ Press the fuse back into the housing.
44
COOLFREEZE
Publicidad
