lylux T3 Manual De Instrucciones página 3

use.The proximity of water presents a hazard even when
the appliance is switched off.
5.WARNING:Do not use this appliance near bathtubs,
showers,basins or other vessels containing water.
6.lf the supply cable is damaged,it must be replaced or
repaired by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
7.This appliance has a non-self resetting thermal cutout
safety device to prevent overheating. If your appliance
cuts out,unplug it from the mains supply socket and
leave to cool.
8.Do not handle any part of the plug or appliance with
wet hands.
9.Do not unplug by pulling on the cable.To unplug,
grasp the plug,not the cable.The use of an
extensioncable is not recommended.
10.Do not stretch the cable or place the cable
under strain.Keep the cable away from heated surfaces
and do not wrap the cable around the appliance.
11.Do not use any lubricants, cleaning agents,polishes
or air fresheners on any part of the appliance.
12. Contact the CUSTOMER SERVICE when service or
repair is required.
13. If the appliance is not working as it should, has
received a sharp blow, has been dropped,damaged,
left outdoors,or dropped into water,please stop using it
and contact customer service.
The air exit and metal ring may be hot
during use. Allow to cool before handling.
2
EN