Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
Squeeze and hold the switch trigger while the unit primes.
This may take several seconds. Continue holding the
trigger until unit begins to spray.
Spray on a dry surface using long, even, overlapping
strokes.
NOTE: While the sprayer is in use some dripping from
the nozzle may occur, this is to be expected.
Release the trigger to stop the spray.
When you are finished with the sprayer, take off the
shoulder harness.
Turn off the sprayer and remove the battery pack.
Unscrew the cap and remove it from the tank.
Return any unused fluid to its original container, and
thoroughly clean the sprayer.
Thoroughly clean the sprayer and tank before transport-
ing or storing the unit and before switching to a different
chemical. See Cleaning the Unit later in this manual.
NOTE: Wipe the outside of the tank with a dry cloth and
clean up any spills.
Thoroughly wash your hands and any area where skin
has been exposed to the spray.
MAINTENANCE
WARNING:
To avoid serious personal injury, always remove
the battery pack from the tool when cleaning
or performing any maintenance.
WARNING:
Always wear eye protection with side shields
or goggles marked to comply with ANSI Z87.1.
Failure to do so could result in fluids entering
your eyes resulting in possible serious injury.
WARNING:
When servicing, use only identical replacement
parts. Use of any other parts may create a
hazard or cause product damage.
OPERATING TIPS
Never point the spray end of the wand at yourself or
others.
Avoid spraying on windy days. Spray can be accidentally
blown onto plants or objects that should not be sprayed.
Never spray in the direction of people or animals; always
spray downwind.
Never smoke, eat, or drink while operating the sprayer.
Especially in warmer weather, use sprayer in the early
morning or late afternoon. Excessive heat can evaporate
the mist before it settles.
NOTICE:
Periodically inspect the entire product for dam-
aged, missing, or loose parts such as screws,
nuts, bolts, caps, etc. Tighten securely all
fasteners and caps and do not operate this
product until all missing or damaged parts are
replaced. Please contact customer service or
a qualified service center for assistance.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
WARNING:
Do not at any time let brake fluids, gasoline,
penetrating oils, etc., come in contact with
plastic parts. Chemicals can damage, weaken,
or destroy plastic which may result in serious
personal injury.
10 — English
Publicidad
