Ensure that the vehicle is outside, or in an open, well-ventilated area and NOT INSIDE
A CONFINED AREA, SUCH AS A GARAGE as bodily injury or asphyxiation resulting in
death could occur. Always operate the inflator in a well-ventilated area free of combustible
materials, gasoline, or solvent vapors. Always set parking/emergency brake and ensure
vehicle is in Park (or neutral if equipped with manual transmission).
CAUTION: HOT • DO NOT HOLD IN HAND WHILE OPERATING.
NOTICE: ENGINE SHOULD BE RUNNING WHILE USING THIS INFLATOR.
It is recommended that you operate your inflator with your vehicle's engine running
to achieve the optimal inflator performance. Never start a vehicle with the inflator
plugged into the DC 12 Volt power socket.
• Do not attempt to disassemble inflator.
• No user serviceable parts inside. The only user serviceable part is the replaceable fuse.
• Keep inflator out of reach of children.
• Place inflator on a hard, clean surface.
• Ensure air hose chuck touches the core of the valve stem for proper inflation.
• DO NOT use inflator continuously for more than 10 minutes. Allow unit to cool approximately 25 minutes
between uses. Do not leave inflator unattended.
• ALWAYS use a pressure gauge to check tire pressure. DO NOT over-inflate.
• Soft inflatables (i.e. rafts, balls, etc.) may not have recommended pressure markings. Be careful not to
inflate items beyond their capacity.
• While operating, never block the inflator input or output.
• For use with 120 volt wall outlet or 12 volt DC power outlets rated 15 amps or higher. Do not use with
older 8 amp cigarette lighter receptacles.
• This appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized
outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician to install the proper outlet. Do not change the plug in any way.
VEHICLE EXHAUST WITHOUT PROPER VENTILATION IS EXTREMELY
DANGEROUS. ALWAYS ALLOW FOR PROPER VENTILATION.