Publicidad
Idiomas disponibles
Idiomas disponibles
1.
Dust Filter:To remove the dust filter, first remove the screw, then simply press the locks with
both hands and pullit out. Use neutral cleaning agent and brush to clean the dust and dirty
on the filter. To attach the cleanfilter, place the bottom of the filter first and then push upper
part until it is locked tightly.
2.
Cooling Pad: After removing the dust filter, you can see the cooling pad. Press the lock in the
middle and gently pullout the pad, use a clean or soft brush to remove dust and dirt from
the pad. Rinse with water if neededand Leave it to dry in open air. Never use any chemical
cleaning solution that can harm pad.
3.
Water Tank: Turn the water tank lock to horizontal position and pull the tank. Use soft cleaning
agents for cleaning.Wash with water and rinse the place it to its housing by pushing gently.
Turn the lock to vertical position.
4.
Exterior Cleaning: Clean the exterior case of the fan with a soft damp cloth except control
panel. Never use hard cleaningagent that can harm the case. Make sure the unit is dry before
operating it.
Caution: Never let water contact with the control panel. Always clean it with a soft dry cloth.
EN
11
Publicidad
