Descargar Imprimir esta página

Blaupunkt BP 1003 Manual De Instrucciones página 9

Publicidad

Idiomas disponibles

Idiomas disponibles

2.
Select the desired power setting by turning on one or more of the heat switches (400W
each). Press the Turn switch to start oscillation. Press it again to switch off the oscillation of
the appliance.
TIP-OVER PROTECTION
This heater is protected with a safety switch that turns off the appliance automatically when the
heater falls over, or is at an excessive angle from the horizontal. This helps prevent accidents,
and the heater will resume operation when it is put back upright.
MAINTENANCE
1.
This heater should be cleaned regularly.
2.
First, disconnect the power plug and allow the heater to cool, then wipe it with a soft cloth
lightly dampened with water (not dripping wet). Do not use detergent or abrasives.
3.
Do not scrape the surfaces with sharp hard tools.
EN
9

Publicidad

loading