Publicidad
Idiomas disponibles
Idiomas disponibles
in order to ensure maximum control of the cut
and uniform result. Proceed to use short cuts
gradually going around the head.
•
Leave the hair a little longer than desired length
as it can always be altered later.
•
While working adapt the comb/comb guide to
the desired result
•
At regular intervals, stop cutting in order to
comb the hair and check the results so far.
STEP 1 – NAPE:
•
Attach the comb guide size 3 / 6 mm
•
Hold the appliance with the razor facing
downwards and begin to cut the hair from the
base of the neck.
•
Make some upward movements, raising the
appliance gradually and away from the head,
cutting the hair gradually until the height of
the ears (Fig.2)
STEP 2 – BACK OF HEAD:
•
Attach comb guide size 9 / 12mm and continue
with the back of the head (Fig.3)
STEP 3 – SIDE OF HEAD:
•
Attach a new shorter guide, size 3 / 6 mm to
trim the sideburns.
•
Attach the longest comb guide size 9 / 12 mm
again and continue until you reach the top of
the head.
STEP 4 – TOP OF HEAD:
•
Using comb guide size 9 / 12 mm, pass the
appliance from the back to the front, against
the growth of the hair (Fig.4). In some cases
it's necessary to go over what you have done a
second time from front to back.
•
The comb guide size 3 / 6 mm is for when you
want to achieve a more precise cut.
•
Use comb guides size 12 mm to leave hair at a
longer length. Hold the hair up with the comb
or the comb and your fingers and cut.
•
Always work form back to the front reducing
the length between your fingers or the comb
and the head gradually.
STEP 5 – FINAL TOUCH:
•
Finally use the appliance without attaching
any comb guides to the blades to cut the hair
around the base of the neck, the sides of the
neck and the ears.
•
To make sideburns straight, turn the appliance
over to use the upper blades (Fig.5). Move the
appliance adapting it the physiognomy of the
head. To achieve more precise results use a
shaver
ONCE YOU HAVE FINISHED USING THE APPLIANCE:
•
Turn the appliance off, using the on/off switch
•
Unplug the appliance from the mains
•
Clean the appliance
•
Put on the protective cover.
Publicidad
