4. Unpacking
• Open the packaging and remove the device care-
fully.
• Remove the packaging material as well as the pack-
aging and transport bracing (if available).
• Check that the delivery is complete.
• Check the device and accessory parts for trans-
port damage.
• If possible, store the packaging until the warranty
period has expired.
ATTENTION
The device and packaging materials are not toys!
Children must not be allowed to play with plastic
bags, film and small parts! There is a risk of swal-
lowing and suffocation!
5. Proper use
The high-pressure cleaner is designed to clean ve-
hicles, machines, buildings, facades, etc. in the pri-
vate sector.
The equipment is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse.
The user / operator and not the manufacturer will be
liable for any damage or injuries of any kind caused
as a result of this.
Please note that our equipment has not been designed
for use in commercial, trade or industrial applications.
Our warranty will be voided if the machine is used
in commercial, trade or industrial businesses or for
equivalent purposes.
6. Safety instructions for high
pressure cleaners
Please read these safety instructions and the original
operating instructions prior to the initial use of your
appliance. Proceed accordingly.
• Apart from the notes contained herein the general
safety provisions and rules for the prevention of ac-
cidents of the legislator must be observed.
• Warnings and notes that are attached on the appli-
ance provide important notes for the safe operation.
22 | GB
Hazard levels
m DANGER
• Pointer to immediate danger, which leads to severe
injuries or death.
m WARNING
• Pointer to a possibly dangerous situation, which can
lead to severe injuries or death.
m CAUTION
• Pointer to a possibly dangerous situation, which can
lead to minor injuries.
ATTENTION
• Pointer to a possibly dangerous situation, which can
lead to property damage.
Electric components
m DANGER
• Risk of electric shock.
• Never touch the mains plug and the socket with wet
hands.
• Check the power cord with mains plug for damage
prior to every use. Immediately have damaged pow-
er cord replaced by an authorised customer service
/ electrician. Do not operate an appliance if the pow-
er cord is damaged.
• All current-conducting parts in the working area
must be protected against jet water.
• The mains plug and the coupling of an extension
cable must be watertight and must never lie in wa-
ter. Moreover, the coupling may never lie on the
ground. The use of cable reels that ensure that the
sockets are at least 60 mm above the ground is
recommended.
• Make sure that the power cord or extension cable
is not damaged by running over, pinching, dragging
or the like. Protect the power cords from heat, oil,
and sharp edges.
• Turn off the appliance and remove the mains plug
prior to any care and maintenance works.
• Repair work and work on the electrical components
may only be performed by an authorised custom-
er service.
m WARNING
• The appliance may only be connected to an electric
supply that has been installed by an electrician in
accordance with IEC 60364.
• The appliance may only be connected to alternating
current. The voltage must correspond with the type
plate of the appliance.
www.scheppach.com