Publicidad
Idiomas disponibles
Idiomas disponibles
or explosive substances, etc. inside or near the appliance.
• Once installed, the appliance must not be tilted at an angle
greater than 5° and it is necessary to wait 2 hours before
connecting it to the power supply to switch it on. The same
applies if the appliance is moved afterwards.
• If the appliance has been switched off or disconnected from
the power supply, it is necessary to wait 5 minutes until
switching on again.
• WARNING! Do not place extension cords with multiple out-
lets or any type of external power supply on the back of the
appliance.
• No other appliances should be plugged into the same socket
as with this appliance.
• Do not attempt to climb onto the appliance.
Intended use
• This appliance is intended to be used in household and simi-
lar applications such as:
- staff kitchen areas in shops, offices and others working
environment;
- farm houses;
- by clients in hotels, motels and other residential type en-
vironment;
- bed and breakfast type environment.
• The appliance is designed for wine storage and cooling. (e.g.
Champagne, white wine , red wine, etc.) Any other use may
lead to damage to the appliance or personal injury.
• Operating the appliance for any other purpose shall be
deemed a misuse of the device. The user shall be solely liable
for improper use of the device.
Grounding installation
This appliance is classified as protection class I and must be
connected to a protective ground. Grounding reduces the risk
of electric shock by providing an escape wire for the electric
current.
This appliance is fitted with a power cord with grounding plug
or electrical connections with grounding wire. The connections
must be properly installed and grounded.
Main parts of the product
(Fig.1 on page 3)
1. Housing enclosure
2. Touch control panel (See ===> Operation)
3. Upper hinge cover
4. Door frame
5. Wooden shelves
6. Lower hinge cover
7. Ventilation holes
8. Door handle
9. Adjustable feet
Remark: The content of this manual applies for all listed items
unless specified otherwise. The appearance may vary from the
shown illustrations.
Circuit diagram
237588, 237557
(Fig.2 on page 3)
A1. PTC Heater
B1. Condenser Fan
C1. PTC Heater Fan
D1. Evaporator Fan
E1. Middle Fan
F1. Plug
G1. Control PCB
H1. Red
I1. Black
J1. Starter
K1. Defrost Sensor
L1. L
M1.Upper Sensor
N1. N
O1. Lower Sensor
P1. LED
Q1. Transformer
R1. Compressor
Circuit diagram
237564, 237595
(Fig.2 on page 4)
A2. PTC Heater
B2. Condenser Fan
C2. PTC Heater Fan
D2. Evaporator Fan
E2. Middle Fan
F2. Plug
G2. Control PCB
H2. Red
I2. Black
J2. Starter
K2. Defrost Sensor
L2. L
M2. Upper Sensor
N2. N
O2. Lower Sensor
P2. LED
Q2. Transformer
R2. Compressor
Control panel
(Fig.3 on page 4)
A. Lower chamber temperature set
B. Lower chamber temperature display
C. Compressor indicator
D. Upper chamber temperature display
E. Upper chamber temperature set
F. Cabinet light control button
G. Celsius and Fahrenheit conversion button
H Power Button
I
Celsius and Fahrenheit indicator
J. Lower chamber
K. Upper chamber
Preparation before use
• Remove all protective packaging and wrapping.
• Check that the device is in good condition and with all ac-
cessories. In case of incomplete or damaged delivery, please
contact the supplier immediately. In this case, do not use the
device.
• Clean the accessories and the appliance before use (See ==>
Cleaning & Maintenance).
• Make sure the appliance is completely dry.
GB
11
Publicidad
