CHARGING THE BATTERY
To ensure optimum performance of the W-0, it is recommended that the internal
battery is charged for a minimum of 10 hours before first time use.
Important:
•
Charging of the W-0 should be in a cool (+10
•
If the W-0 is to be stored for an extended period, this should be in a
cool dry place (–20
battery. The W-0 should be charged until full every 6 months.
•
Always charge the battery indoors.
1.
Connect the power adapter at the base of the unit and plug the W-0 into a
power outlet. The charging icon will display on the screen.
Warning: The power adaptor is intended for indoor use only. Do not
expose to rain or dampness.
2.
When the charge shows 100%, the W-0 is ready to use with or without the
power adapter.
Note:
•
When the W-0 is in use, the battery icon will display and show remaining
charge.
•
When using the scale and the charge level falls below 5% the battery icon will
flash. You will have about 60 minutes to complete the weighing session before
the W-0 must be charged.
•
When the charge level becomes critical, the unit will sound 3 quick beeps and
the LED will flash 3 times, then shut down.
•
Charging outside the recommended temperature range will reduce charging
performance. When charging above 40
•
If charging temperatures have been exceeded, charging will stop until the unit
cools down. The charge indication will stop in this condition.
•
If a battery error occurs the battery indicator will flash all the segments.
Return the Weigh Scale to a Gallagher Authorised Service Centre for battery
replacement.
2
Gallagher W-0 Weigh Scale User Guide
C to 25
C, humidity 45% to 85%) with a fully charged
o
o
C, the charging time is increased.
o
C to +30
C) place.
o
o