Descargar Imprimir esta página

Kärcher BR 30/4 C Bp Manual De Instrucciones página 12

Ocultar thumbs Ver también para BR 30/4 C Bp:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 47
Environmental protection
The packaging material can be
recycled. Please do not throw the
packaging material into house-
hold waste; please send it for re-
cycling.
Old appliances contain valuable
materials that can be recycled;
these should be sent for recy-
cling. Batteries and accumulators
contain substances that must not
enter the environment. Please
dispose off old devices, batteries
and rechargeable batteries
through suitable waste collection
systems.
Electrical and electronic devices
often contain components which
could potentially pose a danger to
human health and the environ-
ment if handled or disposed of in-
correctly. However, these compo-
nents are necessary for the prop-
er operation of the device. Devic-
es marked with this symbol must
not be disposed of with regular
household rubbish.
Notes about the ingredients (REACH)
You will find current information about the
ingredients at:
www.kaercher.com/REACH
Control elements
Illustrations on the inside of the front
cover
Illustration
1 Handle
2 Water pump switch
3 Switch for brushing/vacuuming opera-
tion
4 Carrying handle
5 Support bow in waste water tank
6 waste water tank
7 Fresh water tank
8 Lock on fresh water tank (filling hole)
9 Battery
10 Battery mount
12
11 Cleaning head
12 Vacuum bar lift pedal
13 Release, park position
14 Battery indicator
For this, see the operating instructions
for the battery
15 Release, battery
16 Unlocking button for the changeable
brush
17 Brush roller
18 Vacuum bar
19 Cover waste water tank
20 Lock lid of waste water tank
21 Filling level display
22 Battery charge indicator
3 LEDs light up: 100-76% residual ca-
pacity
2 LEDs light up: 75-51% residual ca-
pacity
1 LED lights up: 50-26% residual ca-
pacity
1 LED flashes: Less than 26% residual
capacity, recharge battery
23 Connection between suction pipe and
suction hose
24 Suction tube
25 Suction hose
Initial Start-Up
Illustration
 Insert tube into the opening of the appli-
ance at the end of the handle.
 Press down and slide the handle into
the appliance until it clicks.
 Align the cable in the appliance and at-
tach the lid as shown on the supple-
ment sheet.
 Charge the battery.
The corresponding description can be
found in the separate operating instruc-
tions for the battery and charger
Insert the battery
Illustration
 Insert the charged battery into the bat-
tery compartment, push it in up to the
stop and snap it in place.
– 2
EN

Publicidad

loading