Bigben PARTY PARTYBTHPLH Manual De Instrucciones página 15

Features and Operation
Power button:
Press the "Power" button to turn the speaker on and off.
Choice of mode:
Press the "mode" button to switch from LINE IN mode to USB and BT (Bluetooth®) modes.
The chosen mode will appear on the screen.
Bluetooth connection:
• When switched on, the speaker automatically switches to Bluetooth search mode.
• Find the device called "PARTYBTHPLH" on your mobile device and select it. Once found,
you'll hear a beep indicating that the speaker is connected to the device.
• During pairing, the text "Blue" flashes during the search and remains fixed once paired.
• Short-press the Next/Previous button to select the next/previous track.
• Short-press the Play/Pause button on the device, and the speaker will play or stop the
music.
AUX-IN mode:
• Press the "mode" button to select AUX mode. The word "AUX" appears on the screen.
• Use the 3.5mm audio cable to connect your device.
• Listen to music via USB/micro-SD card
• Insert a USB key/micro-SD card into the slot, and the music will start automatically.
NB: Maximum supported capacity of 32 GB for playing USB/SD cards. This device plays
This device plays MP3, WAV formats. The device does not play SanDisk Ultra 32GB SD
cards.
EQ light:
The light turns on when the speaker is turned on and the LED light button is set to ON. Press
and hold the MODE button to change the light effects.
Fast rewind: In USB or micro-SD card mode, you can long-press the "previous" button to get
the fast rewind function.
Fast forward: In USB or micro-SD card mode, you can long-press the "next" button to get the
fast forward function.
Standby mode: The speaker will go into standby mode after 10 minutes without use.
How to recharge:
• Do not use a power source greater than 9V 2A.
• Recharge your speaker with our standard 9V/2A USB adapter. During charging, the LED
indicator lights up red. The LED charging indicator turns off when charging is complete.
• An audible signal will remind you to recharge the battery when it's low. As soon as the beep
sounds, remember to plug in your speaker to recharge it.
- EN 15 -