Publicidad
Idiomas disponibles
Idiomas disponibles
P L E A S E R E A D A N D F O L L O W A L L S A F E T Y T I P S
1. Before assembly, CAREFULLY use scissors or utility knife to cut and unwrap all parts. Make sure
you do not discard the hardware.
2. Make sure that you have all the parts listed. If you are missing any parts please email Customer
Service: parts@twinstarhome.com or call 1-866-661-1218 in English, 1-866-374-9203 in French
or 1-866-661-1218 in Spanish. Please identify the parts you need and model number. Make sure
to include your name and address.
DO NOT MOVE MANTEL OR INSERT WHILE PLUGGED INTO POWER SUPPLY.
• All steps must be handled with a minimum of 2 adults.
• Attach the f ireplace insert to the completed wood mantel last. INSTALL INSERT IN FROM THE
BACK OF THE FIREPLACE SO AS NOT TO SCRATCH THE HEARTH/BASE.
• Use care in assembling your new fireplace, take your time and use the hardware provided and a
quality Phillips head screwdriver. NEVER OVER TIGHTEN BOLTS.
• Do not sit on top of the mantel.
1. Dust your f ireplace regularly with a soft non-lint producing cloth or household dusting product.
For a complete tight fit every bolt
should have a flat washer. First slide a
flat washer onto the bolt.
All panels are labeled Left and Right as viewed
from the front of unit.
1. Locate Hearth/Base (A) and set out stone
laminated side up on the floor.
2. Locate Left Side Panel (B), insert one Wood
Dowel (N) into each of the pre-drilled holes.
Attach the Side Panel to Hearth/Base (A). Then
use Bolt (L) and Washers (M) through the
pre-drilled holes in the mounting blocks.
HAND TIGHTEN ONLY.
3. Locate Right Side Panel (C), insert one Wood
Dowel (N) into each of the pre-drilled holes.
Attach the Side Panel to Hearth/Base (A). Then
use Bolt (L) and Washers (M) through the
pre-drilled holes in the mounting blocks.
HAND TIGHTEN ONLY.
E-2
GETTING STARTED
CAUTION:
HELPFUL HINTS
CARE & CLEANING
Right Side
Panel
L
M
C
Hearth/Base
N
A
N
N
Left Side
Panel
B
N
N
N
L
M
N
Publicidad
