Publicidad
Idiomas disponibles
Idiomas disponibles
Pyrolytic function
This function allows you to clean thoroughly the oven cavity.
1.
Turn knob "K1" to select the pyrolytic function. LED will display "PyR".
2.
Press the "
" key to confirm, and the default working time is 2 hours.
3.
Turn knob "K1" to adjust the working time. The time can be set 1:30 or 2:00 hours.
Notes
1.
When the oven door is not closed, pressing start button will be invalid, LED display "door",
"PYR".
When the oven's center temperature is highter than 320°C, pressing start button will be invalid.
2.
The LED will display "COOL" and "PYR". When the oven's center temperature is lower than 200°C,
press cancel button once, it will pause; press again, it will return to standby state. If higher than
200°C, press cancel button once, it will return to standby state directly.
3.
Open the door when the oven is working, the LED will display "door" and the buzzer will
sound continuously until the door was closed or press cancel button.
4.
Before activating the pyrolytic cleaning function, remove any excessive spillage and make
sure that oven is empty. Do not leave anything inside it (e.g. pans, baking tray, dripping pan,
slider bracket etc.) as this could heavily damage them.
5.
When finished pyrolytic cleaning, don't interrupt the power in an hour.
Open door detection
1.
When the oven door is opened during cooking, the oven will enter a pause state (except the
lamp function).
2.
When the oven door is opened, presse the "
time, the oven cannot be started.
3.
During the reservation process, open the oven door, When the reservation time is reached,
the oven will enter a pause state (except pyrolytic, lamp and defrost functions).
4.
After the booking time of pyrolytic function arrives, if the oven door is in the open state, the
oven will return to the standby state.
5.
Opening the oven door does not affect the operation of the alarm clock function.
" key, and the screen displays "door". At this
14
V.1
Publicidad
