PNI PMR R80 PRO Manual Del Usuario página 6

Basic instructions
Install the batteries
1. Before the first use, charge the batteries for at least 16 hours. To charge
them, you can use the dual desktop charger or you can connect the USB
cable to the radio's USB C port.
2. Insert the charged batteries into the radio. Loosen the screws, remove
the cover and insert the 3 AA Ni-MH batteries respecting the polarity
marked on the housing.
3. Close the cover and tighten the screws.
Note: You can also use alkaline batteries to power the radio. Do not attempt to
charge alkaline batteries.
Turn the radio on and off
To turn on the radio, long press the on/off button. To turn off the radio, long
press the on/off button again.
TX and RX
After turning it on, the radio automatically enters reception mode (RX). When
User manual
16. CTCSS / DCS code
17. Channel number
18. No sound (Mute)
19. Dual Watch function active
20. RX indicator (reception)
21. TX indicator (transmission)
22. The emergency call function is
active
23. VOX function active
24. Locked keys
25. Battery level indicator
26. Channels scanning in progress
6