Publicidad
Idiomas disponibles
Idiomas disponibles
Figure 4. Terminal Rings
Connecting the Charger With the DC Accessory Plug
The charger's output leads also contain a DC accessory plug (Figure 5).
Figure 5. DC Accessory Plug
1. Insert the DC plug into the vehicle's DC accessory outlet.
2. Insert the AC plug of the charger into any standard 110/120 volt AC wall
outlet.
Charging the Battery
1. Slide the Charge Rate Selector switch to 1 amp or 2 amps.
2. Leave the charger on.
3. Monitor the battery from time to time.
Note: A clicking sound may occur during this process.
This is normal.
Fuse Replacement (DC Accessory Adapter)
1. Remove plug from accessory outlet. Remove the gold cap by turning counter-
clockwise and lifting off.
2. Remove center pin and spring. Remove fuse.
3. Replace fuse with same type and size fuse (5 amp).
4. Replace center pin and spring inside plug.
5. Replace gold cap by turning clockwise.
BLACK
RED
– 8 –
Publicidad
