Publicidad
Idiomas disponibles
Idiomas disponibles
Keep the operating instructions in a safe place for
future use.
Pass the operating instructions on to all persons
who work with the machine.
You may not start to operate the machine until
you have read these operating instructions,
observed all the instructions given and
installed the machine as described!
This machine must not be operated / used by
children, persons with restricted physical, sensory or
mental abilities or a lack of experience and/or know-
how or by persons who are not familiar with the
instructions.
The machine must not be operated by children or
young people under 16 years of age.
National and local regulations may determine a
different age restriction for the user.
Contents
Assembly
Extent of delivery
EC Declaration of Conformity
Symbols on the machine
Symbols in the operating manual
Operating times
Proper use
Residual risks
Safety instructions
Commissioning
Working with the garden shredder
Adjusting the fixed counter blade
Maintenance / Cleaning / Storage
Operational faults
Technical data
Guarantee
Spare parts
Extent of delivery
After unpacking, check the contents of the box
that it is complete
check for possible transport damage.
Report any damage or missing items to your dealer, supplier or
the manufacturer immediately. Complaints made at a later date
will not be acknowledged.
• 1 pre-assembled device unit
• 1 standing leg (left)
• 1 standing leg (right)
• 1 axle
• 2 wheels
12
11
12
12
12
13
13
13
13
13
15
16
16
17
18
19
19
176
• 2 wheel covers
• 1 screw bag
• 1 collection sack
• 1 operating manual
• 1 warranty declaration
EC Declaration of Conformity
No. (S-No.): 14716
according to EC directive: 2006/42/EC
We,
Altrad Lescha Atika GmbH
Josef-Drexler-Str. 8 – 89331 Burgau – Germany
herewith declare under our sole responsibility that the product
Gartenhäcksler (Garden Shredder) type / model ALA 2500
Serial number: 000001 – 025000
is conform with the above mentioned EC directive as well as with
the provisions of the guidelines below:
2014/30/EU, 2011/65/EU and 2000/14/EC+2005/88/EC.
Following harmonized standards have been applied:
EN 60335-1:2012+A11+A13+A1+A14+A2; EN 50434:2014;
EN 62233:2008; EN 55014-1:2006+A1; EN 55014-2:2015;
EN 61000-3-2:2014; EN 61000-3-11:2000
Conformity assessment procedure: 2000/14/EC - Appendix
V and 2005/88/EC.
Measured level of the acoustic output L
Guaranteed level of the acoustic output L
Keeping of technical documents at:
Altrad Lescha Atika GmbH – Technical department
Josef-Drexler-Str. 8 – 89331 Burgau – Germany
i.A.
Burgau, 21.04.2021
i.A. G. Koppenstein,
Engineering design management
Symbols on the machine
Carefully read the operating manual and
the safety instructions before starting the
machine and observe the instructions
when operating.
Switch off the machine and pull the mains
plug before performing settings, cleaning
the machine or if the cable is entangled or
damaged.
Danger – objects may be thrown out at
high speed when motor is running. Keep
bystanders, pets and domestic animals
out of the danger area.
Wait until all machine parts have come to
a dead stop before touching them.
Danger – rotating blades. Keep hands and
feet out of openings while machine is
running.
Wear eye and ear protection.
Wear protective gloves.
90 dB (A).
WA
96 dB (A).
WA
Publicidad
