CHART CAIRE FreeStyle Manual Del Usuario página 18

4. Ensure the green light on top of the Universal
power supply is illuminated. This indicates
that the power supply is receiving power from
the outlet. If the green light is not illuminated,
check for secure connections and refer to the
troubleshooting section of this manual.
5. If the battery pack is in need of re-charge,
the battery status indicator lights should blink
accordingly to show charging.
6. Turn on the FreeStyle by pressing the numeric
flow selection button of the pulse flow setting
prescribed by your physician to turn on the
device.
DC POWER
DC power is for use in the accessory outlets of
automobiles, boat, or other motor vehicles. The
FreeStyle is fully functional on DC power for use.
The FreeStyle will also recharge the battery pack
if needed any time DC power is available. The
battery pack will recharge both if the unit is off or
on and in use.
WARNING: DO NOT CONNECT
EXTERNAL POWER WITHOUT A
BATTERY PACK INSTALLED IN THE
FREESTYLE OR FREESTYLE 5.
1. Connect the universal power supply to the
power connector inlet on the side of the
FreeStyle. Be sure to push inward so that the
connection is secure.
18 — MN218-C4 A English
2. Connect the DC power cord to the inlet marked
"ACCESSORY DC IN" on the universal power
supply
3. Connect the opposite end of the DC power
cord to automobile or other DC accessory outlet.
4. Turn on your motor vehicle.
5. Ensure the green light on top of the Universal
power supply is illuminated. This indicates
that the power supply is receiving power from
the outlet. If the green light is not illuminated,
disconnect the power supply from the DC outlet,
restart the motor vehicle, and then reconnect the
power supply to the DC outlet.
6. If the battery pack is in need of re-charge,
the battery status indicator lights should blink
accordingly to show charging.
7. Turn on the FreeStyle by pressing the numeric
flow selection button of the pulse flow setting
prescribed by your physician to turn on the
device.