Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY WARNINGS
Before using this connector, read all instructions
and cautionary markings on this connector, battery
cartridge, and product using this connector.
Follow all safety warnings and instructions. Failure
to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Work area safety
Do not expose this connector to rain, snow,
1.
or wet condition. Otherwise water may get into
the connector and cause electric shock or short
circuit.
2.
Do not operate this connector in explosive
atmospheres, such as in the presence of flam-
mable liquids, gases or dust. Risk of explosion
or fire.
Electrical safety
1.
Use a USB cable that matches the USB
Type-C terminal. Do not modify the USB cable.
Otherwise malfunction may occur.
2.
Do not short the terminal. Keep the terminal
away from other metal objects, like needles
or wires, which can make a connection from
one terminal to another. Shorting the terminals
together may cause burns or a fire.
3.
Use this connector only with specifically des-
ignated battery packs. Do not use the modified
battery. Use of any other battery packs may cre-
ate a risk of injury and fire.
Service
1.
Have this connector serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of this con-
nector is maintained.
Do not disassemble or tamper with this con-
nector. It may result in a fire, excessive heat, or
explosion.
If you notice any abnormality in this connector,
send it Makita Authorized or Factory Service
Centers for inspection and repair.
If a person without repair knowledge and skills
repairs this product, not only it will not perform
sufficiently, but there is also the risk of an accident
or injury.
Additional safety warnings
1.
Inspect for damaged parts. If any abnormality
or malfunction occurs, stop using this connec-
tor immediately. If you continue to use it, smoke/
fire, electric shock, and injury may occur.
<Examples of abnormalities/failures>
—
The cable or the terminal are abnormally hot.
—
There is deep scratches or deformation.
—
When touching the USB cable, conductors
may or may not be energized.
—
It smells burnt.
—
There is an electrical sensation.
If you feel any trouble, immediately disconnect
power source from the connector and contact
Makita Authorized or Factory Service Centers
for inspection and repair.
2.
If you notice any abnormalities such as heat
generation of the battery cartridge during use,
immediately remove and stop using the battery
cartridge. Continued use may cause smoke, fire,
or explosion.
Do not store and use this connector in loca-
3.
tions where the temperature may reach or
exceed 50 °C (122 °F).
Store in a dry place and out of the reach of
children. There is a risk of an accident.
4.
Do not touch the terminals with wet hands.
Risk of electric shock.
Do not drop this connector. Risk of malfunction.
5.
SAVE THESE INSTRUCTIONS – This manual con-
tains important safety and operating instructions
for this connector.
When lending this connector, always attach this
instruction manual.
Safety warnings for radio waves
Do not use this product near electronic
1.
devices with high-precision control and faint
signals. (Examples of electronic devices that
require caution: A hearing aid, a pacemaker,
other medical equipment, a fire alarm, an
automatic door, and other automatic control
equipment).
2.
The radio wave of this product is not guaranteed in
all environments. In the following cases, the radio
wave may not reach or the radio wave may be
interrupted.
—
When using this product in buildings where
concrete, rebar, or metal is used.
—
When using this product near obstacles.
—
When this product is interfered with wireless
communication devices that use the same
frequency.
—
When using this product near the equipment
such as microwave ovens that generates
magnetic field, static electricity, or radio
interference.
5 ENGLISH
Publicidad
