NOTE: Do not install the spa on carpet or other material that can be damaged by moisture.
d) Outdoors installation:
1. No matter where you install the spa, it is important you have a solid support foundation. If you are
installing the spa outdoors, ensure there are no sharp objects that could damage
it and that the location is level so the spa sits stably and properly.
2. During filling, emptying or when in use, water may spill out of the spa. The spa should be installed
near a ground drain.
3. Do not leave the spa's surface exposed to direct sunlight for long periods of time.
C Assembly
1.
Unfold the spa from the packaging. Spread the spa and cover. Make sure both are right side up.
2.
Open the air outlet on the spa. Screw one end of the inflation hose onto it.
3.
Open the air valve on the spa. Connect the other end of inflation hose into the valve.
1