Publicidad
Idiomas disponibles
Idiomas disponibles
WIFIWSxxx
Smart light control
Use
1. Download and install the app "Nedis SmartLife" from
Apple App Store or Google Play Store on your mobile
device.
2. Launch the app "Nedis SmartLife".
3. Create a new account or log in to your existing
account.
4. Tap "+" to add the device.
5. Select "Wall switch" from the list of products.
6. Remove the existing wall switch.
7. Install the smart light control according to the
illustration.
N: neutral wire
L: live wire
X: light unit
8. If the status indicator does not flash: Press and hold
any button for 6 seconds.
If the status indicator flashes: Confirm in the app.
9. Confrm the Wi-Fi network and password.
10. Enter the device name.
Note: The device name will also be used by Amazon
Alexa and Google Home.
Safety
•
To reduce risk of electric shock, this product should
only be opened by an authorized technician when
service is required.
•
Disconnect the product from the mains and other
equipment if a problem should occur.
•
Read the manual carefully before use. Keep the
manual for future reference.
•
Only use the device for its intended purposes. Do not
use the device for other purposes than described in
the manual.
•
Do not use the device if any part is damaged or
defective. If the device is damaged or defective,
replace the device immediately.
•
The device is suitable for indoor use only. Do not use
the device outdoors.
•
Do not expose the product to water or moisture.
•
Do not touch the device with wet hands.
Cleaning and maintenance
Warning!
•
Do not use cleaning solvents or abrasives.
•
Do not clean the inside of the device.
•
Do not attempt to repair the device. If the device
does not operate correctly, replace it with a new
device.
•
Clean the outside of the device using a soft, damp
cloth.
Support
If you need further help or have comments or
suggestions please visit www.nedis.com/support
3
English
Publicidad
