Error Code Display - Bosch SmartphoneHub CUI100 Instrucciones De Servicio

English – 6
You can independently carry out the
update in the COBI.Bike app and do
not need to visit your Bosch eBike
dealer.
This indicator appears when the
SmartphoneHub is connecting to the
smartphone.
The completion of the Bluetooth® pair-
ing is indicated by means of a tick
against the small smartphone symbol.
This indicator appears whenever the
SmartphoneHub is in recovery mode
(only in this status can new software
be installed). The small Bluetooth®
symbol indicates the connection to
the smartphone.
The completion of the recovery opera-
tion is indicated by a tick.
Your operating system is non-func-
tional for the following reasons:
1. One or more incompatible com-
ponents have been detected. This
CHECK APP
situation can only be rectified by a
Bosch eBike dealer.
2. An out-of-date version of the soft-
ware has been detected. This can
only occur as a result of an inten-
tional software downgrade. The
problem can be resolved with a
software update; please follow
the instructions in the COBI.Bike
app.
Following this notification, the eBike
system switches off.
This indicator appears if the
COBI.Bike app is open and is in dash-
APP MODE
board mode.
Code Cause
410 One or more buttons of the on-board com-
puter are disabled.
414 Operating unit connection problem
418 One or more buttons on the operating unit
are disabled.
419 Configuration error
422 Drive unit connection problem
423 eBike battery connection problem
424 Communication problem between com-
ponents
426 Internal time-out error
1 270 020 XBC | (22.04.2020)
74
KM
+ t o s t a r t
35
%
1/1
eBike system
update necessary

Error code display

The eBike system's components are continuously and auto-
matically monitored. If an error is detected, the correspond-
ing error code is displayed on the on-board computer.
The drive may be automatically shut down, depending on the
type of error. However, if you wish to continue cycling, you
will always be able to do so without assistance from the
drive. Before undertaking any other journeys, the eBike
should be checked.
Have all repairs performed only by an authorised bike
u
dealer.
Corrective measures
Check whether any buttons are stuck, e.g. as a result of dirt finding
its way in. Clean the buttons if need be.
Have the connections checked
Check whether any buttons are stuck, e.g. as a result of dirt finding
its way in. Clean the buttons if need be.
Restart the system. If the problem persists, contact your Bosch
eBike dealer.
Have the connections checked
Have the connections checked
Have the connections checked
Restart the system. If the problem persists, contact your Bosch
eBike dealer. With this error, it is not possible to bring up the wheel
circumference in the basic settings menu or to adjust it.
This indicator appears if the
COBI.Bike app is connected to the
Bosch SmartphoneHub and the drive
unit has not yet been switched on. To
do this, undertake one of the following
actions:
– Press the "Start" button in the
COBI.Bike app.
– With the COBI.Bike app open, ro-
tate the smartphone so that it is in
landscape.
– Press the + button on the operating
unit.
This indicator appears if one or more
eBike components require a software
update.
The update can only be carried out by
an authorised Bosch eBike dealer.
You can hide the indicator by pressing
any button on the operating unit. The
indicator will appear every time the
eBike system is started until the up-
date has been carried out. You can
still continue to use your eBike
without any restrictions. The number
at the top right indicates the number
of instructions.
Bosch eBike Systems