Publicidad
1
2
3
20
English
Citterio M 34964XX1
Remove the cap.
Cut the plaster shield so that it extends ¹⁄₁₆" outside the
surface of the finished wall.
If using an electric cutter, protect the tile.
Seal the wall around the plaster
shield with waterproof sealant (1).
Failure to seal the wall can lead to
possible water damage.
Install the extension spindle (2).
Cut the extension spindle so that it extends ¼" outside
the surface of the finished wall (1).
Install the slip connector (2).
Publicidad
