Samsung WA45T3400AP Manual De Usuario página 54

Troubleshooting
Code
Water is not supplied.
•
•
•
•
4C
•
•
When the washer displays "4C", the washer do draining for 3 minutes. During
this time, the POWER button is inoperative.
•
4C2
Water is not draining.
•
•
5C
•
•
•
The electronic control needs to be checked (Over Voltage Error).
•
9C1
•
•
Low voltage detected
9C2 •
•
54 English
WA3400T_DC68-03850E-04_EN.indd 54 WA3400T_DC68-03850E-04_EN.indd 54
Make sure the water taps are open.
Make sure the water hoses are not clogged.
Make sure the water taps are not frozen.
Make sure the washing machine is operating with sufficient water
pressure.
Make sure that the cold water tap and the hot water tap are properly
connected.
Clean the mesh filter as it may be clogged.
NOTE
Make sure the cold water supply hose is firmly connected to the cold
water tap.
If it is connected to the hot water tap, the laundry may be deformed with
some cycles.
Make sure the drain hose is not frozen or clogged.
Make sure the drain hose is positioned correctly, depending on the
connection type.
Clean the debris filter as it may be clogged.
Make sure the drain hose is straightened all the way to the drain system.
If the information code remains, contact a customer service centre.
Check the PCB and wire harness.
Check if power is supplied properly.
If the information code remains, contact a customer service centre.
Check if the power cord is plugged in.
If the information code remains, contact a customer service centre.
Meaning
2022-06-30 2022-06-30 12:13:31 12:13:31