ENGLISH
2. BEFORE USE
-
This air fryer has a packaging designed to protect it during transport. Unpack the appliance
and keep the original packaging box and other packaging materials in a safe place. It will
help you prevent any damage if the product needs to be transported in the future. In case
the original packaging is disposed of, make sure all packaging materials are recycled
accordingly.
-
Make sure all parts and components are included and in good conditions. If there is any
piece missing or not in good condition, immediately contact the Technical Support Service
of Cecotec.
Box contents:
-
Air fryer
-
Basket
-
Silicone brush
-
Silicone spatula
-
Silicone mat
-
Silicone mould
-
Instruction manual
-
Clean the basket and rack thoroughly with hot water, washing-up liquid, and a non-abrasive
sponge.
-
Clean both the interior and the exterior of the device with a damp cloth.
-
Make sure all parts of the air fryer are completely dry and place the rack in the basket
properly.
-
Place the air fryer on a stable, flat surface.
-
Clean all the accessories before using them for the first time or if you have not used them
for a long period of time with water and non-abrasive detergent.
Warnings
-
Do not wet the heating element inside the fryer.
-
Do not fill the air fryer with oil or any other liquid.
-
Do not place the device on any surface that it is not heat-resistant.
Please note
You may notice a slight burning smell or smoke when using the fryer for the first time, caused
by the excess of lubricants from the manufacturing process. This will not affect the fryer safety.
44
CECOFRY FULL INOX 5500 PRO
CECOFRY FULL INOXBLACK 5500 PRO
3. OPERATION
1.
Place the air fryer on a stable, flat surface.
2.
Connect it to a mains socket.
3.
Use the handle (4) to carefully remove the basket (3). Make sure the rack (5) is correctly
placed in the basket (3).
4.
Put the ingredients inside the basket (3).
5.
Place the basket back (3). The fryer has a safety system that will not allow you to use it if
the basket is not in place (3).
6.
Press the On/off icon (12), then select the desired pre-set function (17) or set the desired
time (1-60 minutes) and the temperature (80-200ºC) and press the On/off icon (12). The
fryer will start operating.
7.
If, at any point during cooking, you wish to pause the process, press the On/off icon (12). If
you wish to end the cooking process, hold down this icon (12) for 3 minutes. If you do not
press any icon for the next minute after pausing, the fryer will enter Standby mode and
will beep 3 times.
8.
When you hear an alarm, it means that the preparation time has come to an end. Use the
handle (4) to remove the basket (3). Depending on the type of ingredients, steam may be
released, so be careful when removing the basket (3).
9.
Check if the ingredients are cooked as desired. If not, put the basket (3) back inside the
device and set the timer for a few more minutes.
10. To remove the ingredients, place the basket (3) on a heat-resistant surface.
11.
Place the basket ingredients on a proper container. Use tongs to remove ingredients, as
this will prevent residual cooking oil from dripping onto the container. Be careful not to
burn yourself. Do not place the basket (3) upside down to remove the food.
12.
You can continue using the fryer if desired or you can finish the cooking process. To do so,
hold down the On/off icon (12) for 3 seconds.
Control panel
On/off icon
-
When the basket (3) and the rack (5) are placed in the correct position inside the air fryer,
the On/off icon (12) will light up.
-
To turn the air fryer on, press the On/off icon (12), the air fryer will beep, and the display will
show 200ºC / 18 minutes alternately.
-
You can set the desired time and temperature or select a pre-set function. Press the On/
off icon (12) to start the selected function or the manual setting. If you press this icon again
(12), the fryer will pause.
-
To finish the cooking process, hold down the On/off icon (12) for 3 minutes.
ENGLISH
CECOFRY FULL INOX 5500 PRO
45
CECOFRY FULL INOXBLACK 5500 PRO