Jata electro PL618 Instrucciones De Uso página 13

• It there still rests of water in the tank, it is due to
the quality controls made in our production line.
• The cleaning and maintenance done by users, can
not be done by children without any supervision.
• If the cable were to deteriorate it must be changed
by an Authorised Service Centre.
INSTRUCTIONS OF USE
STEAM IRONING
• Set the temperature selector (8) to its maximum position (max) by turning it clockwise.
• Before filling the tank with water, set the adjustable steam knob (4) to the off position
• To fill the tank, always do so with the iron unplugged from the mains.
• Open the filling lid (5) and pour water into the tank using the cup provided.
• Do not go over the MAX. indication of the tank (9) to avoid overflowing.
• Replace the lid.
• Plug the iron into the mains. The indicator (1) will light on.
• Once the pilot light (1) goes off, turn the steam knob (4) to the maximum steam indication
getting the desired amount of steam.
SUPER STEAM
• The temperature selector (8) must always be set to its maximum position (max).
• Press and release the button (3). Repeat this operation at intervals between each time you press
the button.
• If you wish to obtain a greater super-steam set the steam control knob (4) to the off
VERTICAL IRONING
• It allows you to remove creases from the garments without them having to be lying on the ironing
board: jackets and coats may be pressed on their hangers; as may be hanging curtains and such.
• Close the adjustable steam knob (4) and place the temperature selector to the (max). position.
• Bring the iron close to the garment in a vertical position and press the steam button (3).
SPRAY IRONING
• To obtain a spray, the temperature selector (8) position is unimportant.
• Press the spray button (2). In case no water should come out, press the button again.
DRY IRONING
• If there is water in the tank, set the adjustable steam knob (4) to the off position
• Plug the iron into the mains and place the selector (8) in the desired temperature for each fabric:
- FIBRAS SINTÉTICAS: SINTHETIC FIBRES: Low temperature (•)
- SEDA – LANA: SILK – WOOL: Medium temperature (••)
- ALGODÓN – LINO: COTTON – LINEN: High temperature (•••MAX)
13
.
until
position.
.