Specifications; Storage; Fcc Statement - Beurer IPL 7500 Manual De Instrucciones

c. In case of a general error, unplug the power cord from
the electrical outlet, wait 10 seconds and then recon-
nect it to reset the device.
• If you still have problems, contact Customer Service.

8. Specifications

Emitted light spectrum
Emitted energy flux:
Selectable energy levels: 3
Treatment window area:
Pulse Rate:
Power Supply Output:
Power Supply Input:
Dimensions:
Weight:

9. Storage

Storage and Transport Conditions
Temperature
Humidity
Pressure
475nm – 1.200nm max
5 Joules/0.16 sq in
(5 Joules/cm²)
0.47 sq in (3 cm²)
1 pulse every 3 seconds
12 VAC, 1.8 Amps
100 – 240 VAC, 50 – 60Hz
2.83 x 5.2 x 1.73 in
(72 x 132 x 44 mm)
7.9 oz (224 g)
14 ºF to 158 ºF (-10 ºC to 70 ºC
0 to 90% RH at 131 ºF (55 ºC )
non-condensing
Operational Conditions
Temperature
Humidity
Max operating altitude

10. FCC Statement

Changes or modifications to the product not expressly ap-
proved by the party responsible for compliance could void
the user's authority to operate the equipment.
NOTICE:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide rea-
sonable protection against harmful interference in a resi-
dential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harm-
ful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interfer-
ence to radio or television reception, which can be deter-
mined by turning the equipment off and on, the user is en-
17
50 ºF to 104 ºF (10 ºC to 40 ºC)
30% to 70% RH
10.000 feet