Publicidad
Idiomas disponibles
Idiomas disponibles
16
16 UNIT START UP
Turn on hot and cold water supplies, and check for leaks above and below the sink
FAUCET FUNCTIONS
17
17 SPOUT FUNCTION
The Spout (17A) can be rotated around the Faucet Body in any direction.
18
18B
HOT
COLD
18A
18 VALVE FUNCTION
By rotating the Lever Handle (18A) away from the Faucet Body (18B), the valve will be
activated allowing water to flow. The water flow will increase by continuing to rotate the
Lever Handle (18A). By rotating the Lever Handle towards you, the water temperature
will decrease to cold flow only. By rotating the Lever Handle away from you, the water
temperature will increased to hot flow only.
Note: Flush faucet before turning on valve (see step 23).
ENGLISH
17A
ON
18A
5
19
19A
19 PULL-OUT OPERATION
The Pull-Out Hose (19A) can be pulled forward to spray water in any direction.
20
20 SPRAY OPERATION
To activate the spray mode, simply press Toggle Button (20A) located under the spray
head. You can change between spray and stream by pressing the opposite sides of the
Toggle Button (20A/20B) while the faucet is in operation. The water flow will increase by
sliding Spray Selector Switch (20C) from side to side (in spray mode only).
Note: The faucet will always turn on in regular stream mode.
21
21 SOAP DISPENSER OPERATION
To activate Soap Dispenser (21A), press Dispenser Head (21B) to spray liquid soap.
MAINTENANCE & CARE
22
22B
22A
22 SPRAY HEAD REMOVAL
To prevent damage to the internal parts of your faucet from debris that may have collected
in the water lines, it will be necessary to flush the faucet. Flushing requires the removal
of the spray Head (22A). To remove the Spray Head (22A), hold metal Hose Fitting
(22B) and turn the Spray Head (22A) counterclockwise.
20C
20B
20A
21B
21A
Publicidad
