Publicidad
Idiomas disponibles
Idiomas disponibles
BATTERY
PLASTIC CAP
49
1. Remove the Meter (No. 10) from Main Frame (No. 1). Then disconnect the link wire of Inductor (No.
49) with the Meter (No. 10).
2. Remove the plastic cap from the back of Meter (No. 10).
3. Remove the old battery and insert the new battery using your fingers. Ensure that the positive side of
the battery which is labeled with a + sign is facing upward once the battery is in place.
4. Put the plastic cap onto the battery seat.
5. Insert the link wire of Inductor (No. 49) into the hole on the back of Meter (No. 10).
6. Attach the Meter (No. 10) onto Main Frame (No. 1).
The replacement is complete.
BATTERY REPLACEMENT
10
1
LR44
WIRE INSERTING HOLE
10
PLASTIC CAP
BATTERY SEAT
Version：1.0
Publicidad
