Uline H-2618 Instrucciones página 2

6. Place one hand on top of cartridge. While holding
down the shoe covers, remove the orange tabs, one
at a time. (See Figure 7)
Figure 7
7. Push cartridge down until it is pressed against the
steel stopper. (See Figure 8)
Figure 8
8. Pull the lip of the shoe cover out, extending both
sides and pull it forward until it connects to the
locking mechanism. It is now properly loaded and
ready for use. (See Figure 9)
PAGE 2 OF 6
INSTRUCTIONS CONTINUED
PUTTING SHOE COVERS ON
1.
Steel Stopper
2. Slowly pull back until cover stretches beyond tip
3. Pull back until shoe cover is released. (See Figure 12)
4. Repeat on other foot.
Figure 9
1-800-295-5510
uline.com
Step in heel first, keeping elastic level with top of
shoe. (See Figure 10)
NOTE: Do not press down to the floor with your
heel, or at all. Keep shoe 3-4" above, and
parallel to the ground.
Figure 10
of shoe. Then tilt toe down below the elastic of the
shoe cover. (See Figure 11)
Figure 11
Figure 12
0421 IH-2618