Publicidad
Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
CD OR CD+G OPERATION
PROGRAM
!
Use this button to program and play back songs in a preselected order.
Step 1: Programming should be done in the stop mode only. Press the PROGRAM button until the PROGRAM LED
flashes, the track will read [
].
Step 2: Press the SKIP buttons (
Step 3: Press PROGRAM button to confirm entry. You can repeat the same steps up to a maximum of 24 tracks.
Step 4: Press PLAY button when you have completed programming and you are ready to start singing.
!
Press the STOP button twice to clear all the programmed entries.
MONITOR ON/OFF
!
Press MONITOR ON/OFF button to ON if you want to display a CDG lyrics on the Singing Machine's
monitor.
!
Adjust the BRIGHTNESS, CONTRAST AND VERTICAL HOLD controls located on the back of the
Singing Machine to display a vivid image.
KARAOKE FUNCTIONS
Sing along with the music by plugging in the provided microphone into either one of the microphone jacks on the unit.
D
Warning - Tapping or dropping the microphone while it is on can permanently damage your microphone. Resist
the urge to swing the microphone around by the cord!
MIC VOLUME
Adjust the MIC VOLUME control to a desired level and obtain the best performance.
D
Warning - To avoid Microphone feedback please avoid being too close to the speaker.
ECHO
Adjust the ECHO control to enhance your voice for a concert hall effect.
BALANCE
Adjust the BALANCE control between the prerecorded singer's voice and the music when using a multiplex karaoke disc.
(Please see Glossary of term to learn more about multiplex on our website.)
AUTO VOICE CONTROL
(MULTIPLEX DISCS ONLY)
AUTO VOICE CONTROL can be activated by rotating the Auto Voice Control. The vocals on the multiplex recording will be
muted when using the microphone. When the microphone is not in use the pre-recorded vocals will resume on a multiplex
disc.
AUX IN OPERATION
Your Singing Machine is designed to connect your favorite Digital Music device (e.g. iPod/MP3 player, etc.)
You can connect your device by using an appropriate cable (
AUX IN function can always be
switched ON once the audio cable is
plugged.
Note: Monitor will be turned off when the
audio cable is plugged.
MASTER VOLUME
Rotate to the MASTER VOLUME
control to obtain the desired sound
level.
D
Warning - To avoid the over-
burst amplified volume output
or possible over-tuned sound
crack, you are recommended to
adjust the Digital Music device
volume to one third or lower at
the beginning.
- SKIP -
) to select a desired track.
3.5mm audio cable not included)
REAR VIEW OF
SINGING MACHINE
AUX IN
E8
.
YOUR DIGITAL PLAYER OR MP3 PLAYER
AUDIO OUTPUT
/ HEADPHONE JACK
Publicidad
