Danby Designer DWC106A1BPDD Manual Del Operador página 6

OPERATING INSTRUCTIONS
DOOR REVERSAL INSTRUCTIONS
If the appliance is placed on its back or side for any
length of time during this process, it must be allowed
to remain upright for 6 hours before plugging it in
to avoid damage to the internal components.
1. Remove the adjustable foot and the lower hinge
from the right side of the cabinet. Remove the
solid foot from the left side of the cabinet.
2. Remove the door from the cabinet. Move the
hinge hole cover from the top left side of the
door to the top right side of the door.
3. Unscrew the hinge pin from the right side of
the worktop and move it to the left side of the
worktop.
4. Install the door on the cabinet. Install the lower
hinge and the adjustable foot on the left side of
the cabinet. Install the solid foot on the right side
of the cabinet.
Note: When reinstalling the door, ensure that the
top of the door is level with the top of the cabinet
and that the rubber gasket makes a good seal with
the cabinet all the way around.
1
2
3
4
5