Descargar Imprimir esta página

Clatronic HTD 2910 Profi Instrucciones De Servicio/Garantía página 24

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 14
5....-05-HTD 2910
GB
1. Fully unwind the mains cable.
2. Fit on a nozzle. You can dry single hair locks by concentrating the flow of hot air
with the hairdressing nozzle. The diffuser is the ideal solution to dry curly hair
without losing volume.
3. Only connect the machine to a properly installed safety socket, 230 V/50 Hz.
4. Setting the Temperature Level (right switch):
Position 1:
Position 2:
Position 3:
Setting the desired blower strength (left switch):
Position 0: OFF
Position 1: gentle stream of air
Position 2: strong stream of air
COOL-Shot:
Clean the air suction opening from time to time with a fine brush. Clean the hou-
sing with a soft, dry cloth without additives.
Removing the air suction cover
Remove the cover after turning the cap through approximately 30 degrees against
a clockwise direction. Remove the intake filter and clean under running water. Dry
the filter well before mounting again!
This device has been tested according to all relevant current CE guidelines,
such as electromagnetic compatibility and low voltage directives, and has been
constructed in accordance with the latest safety regulations.
Subject to technical changes without prior notice!
The device supplied by our Company is covered by a 24 month guarantee starting
on the date of purchase (receipt).
During the life of the guarantee any fault of the device or its accessories *) ascriba-
ble to material or manufacturing defects will be eliminated free of charge by repai-
ring or, at our discretion, by replacing it. The guarantee services do not entail an
24
06.05.2004
14:10 Uhr
Commissioning
cold air
medium temperature for gentle drying and shaping
high temperature for rapid drying
With this switch it is possible to interrupt the heating
process so that the air can be mixed according to individual
requirements.
Cleaning and care
Guarantee
Seite 24

Publicidad

loading