Child Lock - Nevir NVR-2504DSUGHDH Manual De Instrucciones

Channel, Recorder, Standby, or On.
Channel : you can preset the time to switch to selected channel. You can only
enter START TIME but not End Time and Duration.
Standby : you can preset the time you want the unit to go into standby mode.
You can only enter START TIME but not End Time and Duration.
On : you can preset the time you want the unit to power ON. Enter the start time
and then switch off the unit. The unit will power on at the preselected Start time.
Recorder : you can set the Channel you want to record, the start time and the
duration. After setting the duration, the system will calculate the End Time
automatically.
Then press OK key to confirm your settings and press POWER key to enter the unit into
standby mode.
Remark : WARNING ! Please do not omit to insert an USB device in the USB port
compatible for recording function.
If you select recorder type, it can be set Enable or Disable options such as AD
Record, Subtitle Record and Txt Record.
Press "OK" after your settings and the system will return to previous menu.
6.2

Child Lock

Child Lock menu can provide convenient locked setup, as shown in the below Figure
1. Here you can set Enables or Disables the system lock, and also can set the parental
rating from 0 to 18.
2. You can revise system password.
(1) Press the 0-9 number key on the remote control to input Old Password, the
default password is set as "0000".
(2) If the password is input correctly, the cursor can move onto Input New Password
option, press 0-9 number key on the remote control to input new 4-digit Password.
55