Sony HT-X9000F Manual De Instrucciones página 40

Audio Return Channel
If the system is connected to a TV's
HDMI IN jack compatible with Audio
Return Channel (ARC), you can listen to
TV sound from the speakers of the
system without connecting an optical
digital cable.
On the system, set
[Advanced Settings] - [HDMI Settings] -
[TV Audio Input Mode] to [Auto]
(page 47). The default setting is [Auto].
Note
If the TV is not compatible with Audio
Return Channel, the optical digital cable
(not supplied) needs to be connected (refer
to the supplied Startup Guide).
One-Touch Play Function
When you play content on a device (Blu-
ray Disc player, "PlayStation
connected to the system, the system
and TV are turned on automatically, the
input of the system is switched to the
input for the device played, and sound is
output from the speakers of the system.
Notes
• If [Setup] - [Advanced Settings] -
[HDMI Settings] - [Standby Through] on
the system is set to [On] or [Auto] and the
TV sound was output from the speakers
of the TV the previous time you watched
the TV, the system may not turn on and
the sound and picture may be output
from the TV even if device content is
played (page 47).
• Depending on the TV, the beginning part
of content being played may not play
correctly.
40
US
[Setup] -
4," etc.)
®
Menu Operation by TV
Remote Control
You can select the system using the
SYNC MENU button on the TV remote
control and operate the system.
This function can be used if the TV
supports the Sync Menu. For details,
refer to the operating instructions of
your TV.
Notes
• In the TV's Sync Menu, the system is
recognized by the TV as "Player."
• Some operations may not be available
with some TVs.
HDMI Standby Through
Power Saving Setting
HDMI Standby Through power saving
setting (page 47) is a function that
allows you to enjoy the sound and
picture of a connected device without
turning on the system.
Set [Setup] - [Advanced Settings] -
[HDMI Settings] - [Standby Through] to
[Auto] (page 47). The default setting is
[Auto].
Note
If the picture of a device connected to the
system is not displayed on the TV, set
[Standby Through] to [On]. If you connect a
TV other than those manufactured by
Sony, we recommend you to select this
setting.
Language Follow
When you change the language for the
on-screen display of the TV, the
system's on-screen display language is
also changed.