Philips GC9635/26 Manual Del Usuario página 13

Problem Possible cause
You did not press the steam
trigger.
The water tank is not placed in
the appliance properly.
The appliance is not switched on.
The appliance has The auto-off function is activated
switched off. The automatically when the
light in the on/off appliance has not been used for
button flashes. more than 10 minutes.
The appliance Water is pumped into the boiler
produces a pumping inside the appliance. This is
sound. normal.
All manuals and user guides at all-guidesbox.com
Solution
Press the steam trigger and keep it pressed
while you iron.
Slide the water tank back into the appliance
firmly ('click').
Insert the plug in the wall socket and
press the on/off button to switch on the
appliance.
Press the power on/off button to switch on
the appliance again.
If the pumping sound continues nonstop,
switch off the appliance and remove the
plug from the wall socket. Contact an
authorised Philips service centre.
ENGLISH
15