Publicidad
Idiomas disponibles
Idiomas disponibles
This warranty does not cover the following: machines used for rental purposes,
damage resulting from shipping (claims must be filed with freighter), accident,
abuse, act of God, misuse, or neglect. Neither is damage from repairs or alterations
performed by non-factory authorized personnel or failure to install and operate
equipment according to the guidelines put forth in the instruction manual.
The manufacturer will not be liable to any persons for consequential damage, for
personal injury, or for commercial loss.
RESPONSIBILITY OF ORIGINAL PURCHASER (INITIAL USER):
•
To process a warranty claim on your SIMPSON® pressure washer, report the
concern to 1-877-362-4271 or cservice@fna-group.com for authorization
and direction to the nearest authorized service centre in your area.
•
Retain original cash register sales receipt as proof of purchase for warranty
work.
•
Use reasonable care in the operation and maintenance of the product as
described in the Owners Manual(s).
WARRANTY DOES NOT APPLY TO FAILURES DUE TO:
•
Freight damage
•
Damage due to chemical deterioration, scale build up, rust, corrosion or
thermal expansion
•
Freeze damage
•
Damage caused by parts or accessories not obtained from an authorized
dealer or not approved by the manufacturer.
•
Normal wear of moving parts or components affected by moving parts.
ENGINE AND EMISSIONS CONTROL SYSTEM
Covered by engine manufacturer warranty. See engine manual.
HIGH PRESSURE PUMP (DEFECTS IN MATERIAL AND WORKMANSHIP)
AAA
- Five (5) years from date of purchase
TM
CAT Pumps
*** - Five (5) years from date of purchase
®
FRAME (DEFECTS IN MATERIAL AND WORKMANSHIP)
Ten (10) years from date of purchase.
ACCESSORIES (DEFECTS IN MATERIAL AND WORKMANSHIP)
Includes nozzles, hoses, spray guns, wands, tires, feet
Ninety (90) days from date of purchase.
OPERATIONAL
ISSUE
Engine will
not start
(see Engine
Owner's
Manual for
further engine
troubleshooting)
TROUBLE SHOOTING GUIDE
POSSIBLE CAUSE
No fuel
Pressure builds up after
two pulls on the recoil
starter or after initial use
Choke lever in the "No
Choke" position
Spark plug wire
not attached
SOLUTION
Add fresh fuel
Squeeze gun trigger to relieve
pressure
Move choke to the "Choke"
position
Attach spark plug wire
21 - ENG
Publicidad
