Publicidad
2. Connect to the Internet
Connect the LAN/WAN or SFP/WAN (GWN7002/7003 only) port to an optical
fiber broadband modem, ADSL broadband modem or community broadband
interface.
Internet
Optical Fiber
ADSL Modem
Community Broadband
3. Connect to GWN7001/7002/7003 Network
Connect your computer to one of the LAN ports.
INSTALLATION
Mounting GWN7001/7002 to the Wall
1. Using a drill, make two holes in the
wall with 135.0mm spacing, 6.0mm
diameter. Put a plastic anchor and
screw (not provided) on each hole.
2. Mount the GWN7001/7002 router
on the mounting screws.
Mounting GWN7003 to the Wall
1. Use the provided screws to fix the two L-shaped
Mounting bracket (rotated 90°) on both sides of
the GWN7003 router.
2. Stick the router port up
and horizontally on the
selected wall, mark the
position of the screw
Front of the GWN7003 Router
hole on the L-shaped
mounting brackets with a
marker. Then, drill a hole at the marked position with an impact drill, and drill
the plastic anchors (prepared by yourself) into the drilled hole in the wall.
Ethernet Cable
Plastic anchor
Screw
Bottom of the
GWN7001/GWN7002
Router
Plastic anchor
~ 3 ~
3. Use a screwdriver to tighten the screws (prepared by yourself) that have
passed through the L-shaped mounting brackets to ensure that the GWN7003
router is firmly installed on the wall.
Grounding GWN7003
1. Remove the ground screw
from the back of the router,
and connect one end of the
ground cable to the wiring
terminal of the router.
2. Put the ground screw back into
the screw hole, and tighten it
with a screwdriver.
3. Connect the other end of the ground cable to other device that has been
grounded or directly to the terminal of the ground bar in the equipment room.
ACCESSING THE CONFIGURATION INTERFACE
Now that you are connected to the GWN7001/GWN7002/GWN7003's LAN port
with network cable, you can access into its configuration interface with:
myrouter.grandstream.com
password to login.
Note: GWN7001/GWN7002/GWN7003's default password information is printed
on the MAC tag at the bottom of the unit.
Screw
To manage GWN7001/GWN7002/GWN7003 over cloud, please refer to
www.gwn.cloud.
The GNU GPL license terms are incorporated into the device firmware and an be
accessed via the Web user interface of the device at my_device_ip/gpl_license. It can
also be accessed here: https://www.grandstream.com/legal/open-source-software
To obtain a CD with GPL source code information please submit a written request to:
or default IP address (192.168.80.1), then enter the
info@grandstream.com
Refer to online documents and FAQ for more detailed information:
https://www.grandstream.com/our-products
~ 4 ~
Ground Wire
https://
Publicidad
