Publicidad
Idiomas disponibles
Idiomas disponibles
Burner ignition hole
Turning on the oven equipped with an ignition button
(See features by model chart, at the end of the manual.)
Make sure that the range is
1
connected to the electric
power, and the oven knob is
in the off position.
Open the oven door.
2
Press and hold the ignition
3
button.
Push the oven knob in and
4
turn it to the highest setting
in the control panel.
Make sure that the burner
5
has actually lit. Then release
the button.
Observe the flames by
6
looking through the hole on
the oven floor.
Set the temperature by
7
turning the knob to the
desired setting.
If the burner did not turn on,
8
go back to step 3 and repeat
the procedure.
68
Publicidad
