Intenso TAB 744 Manual De Instrucciones página 31

The touchscreen should not be exposed to water or other electrical devices to avoid malfunctions
and permanent defects.
Notes
a. If the touchscreen is not operated for two minutes, the device goes into standby mode. Briefly press the on / off button to switch to
active mode.
b. To prevent unwanted input, a lock mode is activated automatically. Please unlock the keypad on the touchscreen by simply
dragging the lock icon from the bottom to the top of the screen. The device will now switch to the home screen. Touch the closed
lock on the display and keep it pressed. Draw the lock now to the open lock
your finger from the display. The screen is now unlocked.
You can rotate the device in all directions. It has a sensor that directs the display automatically.
9.) WiFi
You need a WLAN connection to connect the device to the internet. Open the WLAN settings in the
settings menu to establish it.
Note: Please note that a wireless network must be located within the range of your current location.
Automatic connection
Open the WLAN settings via the settings menu. Here you can quite simply activate or deactivate the
WLAN function. Just slide the virtual switch from the position "On" to the left to deactivate the WLAN
function. Now, the display changes to "Off". To reactivate the deactivated WLAN function, just slide
the virtual switch to the right.
Tap on the WIFI settings and all available networks as well as all already used networks are
shown.
Tap on the desired network and, if required, enter the appropriate WiFi key (password) to establish
a connection.
just appearing on the display and release
EN - 6