Sony LBT-SH2000 Manual De Instrucciones página 22

Creating a party
atmosphere
(DJ EFFECT)
1
Press the following button to
select the effect type.
• FLANGER: Create a deep flanging
effect that is similar to the roar of a
jet plane.
• ISOLATOR: Isolate a specific
frequency band by adjusting the
other frequency bands. For example,
when you want to focus on only
vocal, etc.
• SOUND FLASH: Flash the sound
output. The sound cuts off
periodically.
• PHASER: Create a series of peaks
and troughs in the frequency
spectrum, like a sweeping effect.
2
Turn DJ CONTROL to adjust the
effect level.
To turn off the effect
Press the selected effect button again.
Notes
• The DJ EFFECT is automatically turned off
when you turn off the system, change the
function or change the tuner band.
• If you activate the DJ EFFECT during
transferring, the sound effect will not be
transferred onto the USB device.
• You cannot use VOLUME/DJ CONTROL to
adjust the volume when the DJ EFFECT is
activated. Press VOLUME +/– on the remote
control to adjust the volume.
US
22
Other Operations
Singing along
You can sing along with any audio source
that played back on this system.
1
Turn MIC LEVEL to MIN to
reduce the microphone volume
level.
2
Connect a microphone to the
MIC jack on the unit.
3
Start playing the music and
adjust the volume.
4
Turn MIC LEVEL to adjust the
microphone volume.
If acoustic feedback (howling) occurs,
reduce the volume, move the
microphone away from the speakers,
or change the direction of the
microphone.
After you have finished, disconnect the
microphone.
Note
During transferring, the sound from microphone
will not be transferred onto the USB device.
Changing the lighting
pattern on the
speakers
1
Press OPTIONS.
2
Press / repeatedly to select
"LED SPEAKER", then press
ENTER.
3
Press / repeatedly to select
the speaker lighting pattern you
want, then press ENTER.
To turn off the lighting, select
"PATTERN OFF".