Waeco AirConServiceCenter ASC 5300 G Instrucciones De Uso página 121

ASC 5300 G
1. Copy the current software on the USB stick.
2. Insert the USB stick in the USB port (15).
15
✓ The station will scan the USB stick for a later version. If the software
on the USB stick is more up-to-date, the following menu is displayed:
If the database on the USB stick is more up-to-date, the following
menu is displayed:
The current version is displayed in black on the bottom line.
3. Press ENTER to update the software or database.
✓ The station shows the progress of the update:
After the update, the station sets the default settings:
The station then restarts and the standby menu appears.
4. Remove the USB stick.
✓ The station is ready for operation.
EN
New firmware release
found
ENTER upgrade STOP EXIT
BML11028
New database release
found
ENTER upgrade STOP EXIT
BML11028
Wait...
Erase flash... Erased!
Writing
Wait!
loading default
parameters
1 63488
7% 762751
Service tasks
121