+GF+ RPC Manual De Instrucciones página 28

Type RPC positioner
5.4.1 Valve mode
Display in valve mode
Valve position: open, intermediate, closed
•
Device status: Failed
•
Valve position
Open
in between
Closed
* Factory setting, selectable colors for valve position: off, white, green, blue, yellow, orange, red
5.4.2 Valve mode + warnings
Displays in valve mode + warnings:
Valve position: open, intermediate, closed
•
Device status: Failure, Function check, Out of specification, Maintenance required (according to NAMUR)
•
Valve position
Open
in between
Closed
* Factory setting, selectable colors for valve position: off, white, green, blue, yellow, orange, red
NOTE!
If several device statuses are present at the same time, the device status of the highest priority is displayed.
Valve Device status
position
Interruption
Status
Color
Open flashes red
in between flashes red
Closed flashes red
* Factory setting, selectable colors for valve position: off, white, green, blue, yellow, orange, red
For warning messages, the LEDs are briefly off between color changes.
When localized, the colors are shown flashing only.
28
Status, color
lights up yellow*
lights up white*
lights up green*
Status, color
lights up yellow*
lights up white*
lights up green*
Function control
Status
Color
flashes orange
flashes orange
flashes orange
Device status: Failed
Status, color (factory setting)
flashes red alternating with yellow*
flashes red alternating with white*
flashes red alternating with green
Device status
Normal mode
--
--
--
Out of specification Service require-
ments
Status Status
Color Color
flashes yellow flashes blue
flashes yellow flashes blue
flashes yellow flashes blue
Operating Instructions
alternating with yellow*
alternating with yellow*
alternating with yellow*