______
Step 1: Preparation
You Will Need (tools not included)
Make sure the following materials are prepared and ready for your installation.
1 to 2 hours
2 people (a person to help with antenna calibration)
o
o
o
o
o
o
NOTE: These instructions will walk you through a "soft" install process to find the
optimal locations for the inside and outside antennas, then through the process of the
permanent installation.
2
Ladder
Phillips-head screwdriver
10mm open-end wrench or adjustable wrench
Drill (if routing cable through wall)
Mounting Option
: 1-2" diameter pole (#901117) or an
A
existing pole
Recommended: Power Strip with surge protection
CELL PHONE SIGNAL BOOSTER
HOME ROOM