Monacor International IMG STAGELINE BEE Manual De Instrucciones página 9

2 Overview
1 Combined input jack for channel 1 to connect a microphone (XLR)
or an audio source with line signal level (6 .3 mm jack) with switch
HI-Z for an instrument
2 Combined input jack for channel 2 to connect a microphone (XLR)
or an audio source with line signal level (6 .3 mm jack)
3 Switch HI-Z: When the switch is engaged, the input of channel 1
is of high impedance .
4 Phantom power LED + 48 V for channels 1 and 2 respectively
5 Switch LOW CUT of the high-pass filter for channel 2
6 Control GAIN of the input gain for channels 1 and 2 respectively
7 LED PEAK to indicate the maximum level reached for channels 1
and 2 respectively
8 Switch LOOP BACK; when the switch is engaged, the audio signal
coming from the computer will be routed back to the computer
along with the signals of the inputs
9 Switch DIRECT; when the switch is engaged, the signal of the in-
puts will be routed to the outputs MAIN OUTPUT (15) and PHONES
(13)
10 Switch STEREO [for DIRECT mode (9) only]: when the switch is
engaged, the input signals will be sent separately to the right and
left outputs; when the switch is disengaged, both input signals
will be sent to both outputs
11 Volume control MAIN for the outputs MAIN OUTPUT (15)
12 Volume control PHONES for the headphone output
13 6 .3 mm jack to connect stereo headphones
14 POWER LED
15 Outputs MAIN OUTPUT (6 .3 mm jacks), e . g . to connect active
speakers
16 USB POWER (Type-C) port to connect a 5 V DC power supply, e . g .
a power supply unit
17 Switch POWER SOURCE to select the port for power supply
18 USB data port
for power supply when it is connected to a Type-C port
19 Opening in the housing to attach an anti-theft device
20 Switch +48 V PHANTOM POWER to activate the phantom power
(position ON) each for the XLR contacts of the input jacks of
channel 1 (1) and channel 2 (2)
3 Important Notes
This product corresponds to all relevant directives of the EU and is
therefore marked with
The product corresponds to the relevant UK legislation and is therefore
marked with UKCA .
• The product is suitable for indoor use only . Protect it against dripping
water, splash water and high air humidity . The admissible ambient
temperature range is 0 – 40 °C .
• For cleaning only use a dry, soft cloth; never use water or chemicals .
• No guarantee claims for the product and no liability for any resulting
personal damage or material damage will be accepted if the product
is not correctly used or not expertly repaired .
(13)
If the product is to be put out of operation definitively, dispose
of the product in accordance with local regulations .
for connection to a computer; can also be used
.
9