Bergstrom SLIMFIT IVECO Euro 6 Instrucciones De Montaje página 19

SLIMFIT
HOW TO CUT EPDM GASKET TO AVOID WATER
!
FILTRATION INTO THE CABIN
A- Glue gasket, keeping 100 mm of
protection paper at each side.
B- Remove the two pieces of paper.
C- Glue by pressing both ends.
B
Gasket
Place the unit on the seal, inserting the
4
inner air distribution panel in the hatch
gap.
Caution! When positioning the unit
above the hatch gap, check that the
wastewater run-offs are not blocked by
the EPDM seal.
Gasket
Remove
A
Gasket
100 mm Approx. (protection paper)
C
Gasket
19
EN
15 mm
Gasket
Cabin roof
Gasket
4