N-Com R Serie Manual De Instrucciones página 61

If you wish to exit the "Speed Dial" menu, press and hold the "" and "" keys until you hear the
Cancelled
command " ", then press "n" to confirm.
N.B.: If no key is pressed within 15 seconds, the system exits the "Speed Dial" menu.
9.2. Conference call function
"Conference call"
The
When a call comes in on a mobile phone connected via Bluetooth to B602, the intercom is
temporarily turned off. However, if you wish to share the phone call with the other helmet, simply
turn on the intercom manually during the phone call.
Turning on the phone conference call function
Turning off the phone conference call function
N.B.: "Telephone Conference" function can only be used between the N-Com series "600"/"800"/"900".
9.3. Smart Navi System
"Smart Navi System"
The
The "SMART NAVI SYSTEM" function allows you to listen to navigator directions coming from the
smartphone even during an intercom call.
The audio stops to allow transmission of the navigator directions from the smartphone and is
automatically re-established at the end of said instructions.
The "SMART NAVI SYSTEM" function is disabled by default on the device.
You can enable / disable the function from the Configuration Menu (Chapter 6).
N.B.: With the Smart Navi System enabled, all audio information coming from the smartphone (for
example, notification sounds) temporarily stops the audio under way.
You can enable / disable the "SMART NAVI SYSTEM" function by using the N-
Com EASYSET program or the N-Com EASYSET APP.
function is available only in Complete Mode.
During the phone call, briefly press "n".
During the phone call, briefly press "n".
function is available only in Complete Mode.
23