Publicidad
Idiomas disponibles
Idiomas disponibles
FUNCTIONS
FRONT PANEL
1. LEDs meter
2. USB interface: use this socket to connect your pen drive or external disk to the unit using USB
interface.(note: mobile disk memory must be less than 64GB.)
3. TF card reader: use this socket to connect your memory card to the unit by TF card. (note: TF
card memory must be less than 64GB.)
4. MODE button: press once to change the current access device or the unit. (USB interface - TF
card reader - Bluetooth ) the unit priority read USB interface , TF card reader.
5. PREVIOUS button: press to move the input to previous track in MP3 & Bluetooth mode, hold
for a few seconds to reduce the current MP3 or Bluetooth media volume.
6. PLAY/PAUSE button: press once to begin playing , press again to pause.
7. NEXT button: press to move the input to next track in MP3 & Bluetooth mode, hold for a few
seconds to increase the current MP3 or Bluetooth media volume.
8. REPEAT button: there are 4 preset repeat modes. Press once to repeat button, and the LEDs
meter will be display "Fold", that unit will be on repeat all track in Folder, press it again and
the LEDs meter will be display "ONE", that unit into repeat current track. Press it third times
and LEDs meter will be display "rAn", that unit into random play mode. Press it fourth times
and LEDs meter will be display "ALL", that unit will be on repeat all track.
9. MIC1/2: this mono input accepts a 1/4" jack (6.35mm) input such as a microphone, guitar or
other musical instrument. (ps. the microphone channels has priority.)
10. MIC volume control: use this control to adjust the output level of the microphone channels.
11. AUX volume control: use this control to adjust the output level of the AUX channels.
12. MASTER control: this adjusts the unit's mix volume, which includes the MIC input, AUX input,
MP3 and the audio of a paired Bluetooth device.
Publicidad
